Saturday June 17, 2017
07:24 PM GMT+8

Advertisement

More stories

Here is the new impression of the new 2017 CR-V, with the latest ‘Honda Sensing’ feature. ― Picture by YS KhongHere is the new impression of the new 2017 CR-V, with the latest ‘Honda Sensing’ feature. ― Picture by YS KhongKUALA LUMPUR, June 17 ― Ahead of the official launch of the new 2017 Honda CR-V, a small group of Malaysian motoring media were invited to a secret location somewhere in Putrajaya to gain some first-hand experience with the vehicle. It was a drive with a difference ― a short burst of acceleration driving both the new CR-V and the outgoing version to compare the power difference, a bit of a slalom to check out the improvements in the overall handling, but a major portion of the time was allocated to explain “Honda Sensing”, the latest feature offered by Honda in the CR-V. The Honda Sensing exercise also included a road demonstration for us media to experience it.

There is an official embargo on the interior shots of the new CR-V, but we are allowed to post external pictures ― this embargo will last until the official launch, which is expected to be in early July ― bookings are open for the new CR-V though.

Sifting through the carious sources of information, we glean that there will be two engine options for the new CR-V, with the current 2.0 litre SOHC, i-VTEC engine being carried over to the base model. This engine develops 155 PS at 6,500 rpm, and 190Nm of torque at 4,300 rpm. The other engine will be a turbocharged 1.5 litre DOHC VTEC engine, which is shared with the current Honda Civic, but re-tuned for more power. Turbo-charging and direct injection make up the difference for the smaller capacity ― the new turbocharged engine gets 193PS @ 5,600 rpm and develops maximum torque of 243 Nm @ 2,000 ― 5,000 rpm. In comparison, the 2.4 litre engine in the outgoing CR-V develops 190 PS @ 7,000 rpm, and 222 Nm of torque peaking at 4,400 rpm.

Despite very similar horsepower figures, the 1.5 litre turbocharged engine will perform better, due to the fact that maximum torque is delivered form as low as 2,000 rpm, and is available in full all through the rev range to 4,000 rpm before it starts to taper off, whilst for the naturally-aspirated 2.4 litre engine, maximum torque is only available at 4,400 rpm, and anywhere below that rpm, the torque is lower.

Besides, in order to unleash all of the 190 PS in the 2.4 litre engine, one would have to have the engine screaming at 7,000 rpm, whereas in the 1.5 litre turbocharged engine, maximum power is unleashed at 5,600 rpm. We all know the Joe Average would hardly want to push his engine all the way to 7,000 rpm, and with all the “meat” lower down in the rev range, the 1.5 litre turbo would provide better driveability.

Both engine variants of the CR-V will be fitted with Constantly Variable Transmissions (CVT), and Honda’s version will have less of the ‘rubber band’ effect. Anyway, at the test drive session, we were given an opportunity to do a back to back acceleration run to compare the 1.5 litre turbocharged CR-V with the outgoing 2.4 litre CR-V ― and the 1.5 litre turbocharged CR-V won every time. It is quicker off the mark, and builds speed faster. In the slalom test, I personally felt there wasn’t any difference ― which means the new CR-V is just as good in handling as the old one. We did not really get a chance to go for a long road drive, so you will have to wait for our report on that later. However, all indications are that the new CR-V is better on account of it being more powerful.

The most interesting part of the new Honda CR-V is of course the Honda Sensing ― the Honda Sensing has three features – Driver Cruising Aid, Side Collision Deterrence, and Frontal Collision Deterrence. The key components are a camera and radar system that works with the vehicle systems.

For driver cruising aid, Honda Sensing offers two features ― Adaptive Cruise Control (ACC) and Low-Speed Follow (LSF). The two features allow a driver to cruise at a safe distance from the vehicle in front of him or her without having to apply brakes or accelerate. ACC maintains a safe distance from the vehicle in front, and automatically applies the brakes should the vehicle in front slow down, braking down to a standstill if necessary. ACC works at between 30 km/h and 180 km/h. At speeds below 30 km/h, LSF takes over and does basically the same function.

Whilst the ACC works on highway cruising, the LSF is an additional feature that drivers will find very useful in city traffic ― with the new CR-V, driver fatigue will be minimised. According to Honda Sensing engineers who were on standby during our drive, other than the safety objectives, Honda also had the aim to increase driver comfort.

In the area of Side Collision Deterrence, three systems work together ― Lane Departure Warning (LDW), Road Departure Mitigation (RDM) and Lane Keep Assist System (LKAS). LDW monitors vehicle lane position and alerts the driver if the vehicle strays out of line. LDW operates at speeds between 72 km/h and 180 km/h, on straight or curved roads. However, if a driver uses turn signals to indicate a lane change, LDW is deactivated.

RDM alerts, applies brakes and assists the driver’s steering to prevent the vehicle driving off the road. When cameras detect the vehicle veering too close to the edge of the road, the steering vibrates to alert the driver. If the vehicle leaves a lane marked by a solid line, RDM provides brake assistance and assists steering to bring the vehicle back to the lane. Note though that this system is driver assist only. In LKAS, a camera reads lane markings and assists the driver’s steering to keep the vehicle within the lane, and works between 72 km/h and 180 km/h. Again, the Honda engineers emphasise that this system is for driver assist only.

In the area of Frontal Collision Deterrence two systems, Forward Collision Warning (FCW) and Collision Mitigation Braking System (CMBS) work in tandem. FCW detects vehicles in front of the driver utilising a camera and radar system. Visual and audible warnings are triggered if the system detects an imminent collision. If no action is taken, CMBS is activated ― CMBS assists in applying brake force progressively when it senses an increasing risk of collision. Note again that these systems are for driver assist only.

The Honda engineers are careful to state that all the systems are for driver assist only ― we had a lengthy question and answer session on the Honda Sensing systems ― Honda says that the driver has priority over the vehicle control, and in any of the areas, the driver action will over-ride the system.

All things said and done, without a doubt, the CR-V’s new systems will be welcomed by the CR-V buyers ― there are similar systems in other car brands, but the thing is, they are usually found in more expensive models ― the difference is Honda is putting these features in their normal range vehicles. Thus we can see that Honda is raising the bar in terms of value for money by putting more features, and useful ones at that, in their vehicles. I don’t know about you, but I am looking forward to a full road test.

More Trending Videos

Drive Channel

Trending Videos

Related Articles

Advertisement

MMO Instagram

Tweets by @themmailonline